CORRECT PIPE SIZING
Drain pipes sized for the specific fixture and its expected flow prevent the slow, recurring clogs that come from undersized lines. We size each run based on fixture type and the number of fixtures it serves.
Installation
New drain line installation for kitchens, bathrooms, laundry, and additions, sized and sloped to move waste water reliably.
Experienced and Licensed Professionals
Tailored Solutions for All Plumbing and Drain Needs
Quality Workmanship
Timely Project Completion
Drain lines that are undersized, poorly sloped, or missing proper venting cause slow drainage and recurring clogs no matter how often they're cleared. Spartan Plumbing and Drain installs new drain lines for remodels, additions, and new fixtures, sizing each line to the fixture it serves and setting the correct slope so waste water flows without pooling.
We work with PVC, ABS, and cast iron depending on what's already in the home and what local code allows, and we tie new drain lines into the existing vent stack correctly so drains don't gurgle or siphon trap water. This matters most in additions and remodels, where new fixtures are being added to an existing drain system that wasn't designed for them.
From a single sink relocation to full drain rough-in for a home addition, we plan the layout before cutting into walls or flooring so the finished system drains reliably for years.
Benefits
Drain pipes sized for the specific fixture and its expected flow prevent the slow, recurring clogs that come from undersized lines. We size each run based on fixture type and the number of fixtures it serves.
Drain lines need consistent slope to keep waste water moving. Too little slope causes solids to settle and clog; too much causes liquid to outrun solids. We set and verify slope on every run we install.
Every drain needs adequate venting to break the vacuum that would otherwise slow drainage or pull water out of traps. We tie new drains into the vent system correctly so they don't gurgle or lose trap seals.
We select pipe material that matches your existing plumbing and meets current code, so new drain work connects cleanly to what's already in place instead of creating mismatched transitions.
What We Do
Installation of drain lines for sinks, tubs, and showers, including trap arms and vent connections sized correctly for each fixture as part of remodels or new fixture installs.
Standpipe and drain installation for washing machines and utility sinks, sized to handle the discharge volume and positioned to prevent overflow during the drain cycle.
Full drain, waste, and vent rough-in for new construction and additions, laid out to meet code and to support the full fixture count planned for the space.
Rerouting existing drain lines to accommodate a remodel or fixture relocation, including tying new runs into the existing stack while maintaining proper slope and venting.
Our Service Areas
Our Process
We listen first — what you are seeing, how long it has been happening and what outcome you need.
We inspect the system and identify the true cause instead of guessing at the symptom.
You get clear options and firm pricing in writing. Nothing starts until you approve it.
The work is completed to code, on schedule and with your property protected and cleaned up.
We test the results, walk you through what we did and follow up to confirm everything is holding.
Call in a Spartan. Straight answers, honest pricing and work that holds up.